SB
 
Ethernet TCP/IP

Step 1 -
Enable the DHCP Parameter to allow the network to automatically assign a Dynamic IP address, or disable the DHCP parameter to specify a Fixed IP address.
DHCP
Step 2 -
Enter the Network Parameters
If the DHCP parameter is ON, the Dynamic IP address will be automatically assigned, and you can skip to Step 3.
If the DHCP parameter is OFF, the Fixed IP address and Mask must be assigned by the user.
Dynamic IP
Fixed IP
Mask
Step 3 -
Save your parameters
Changing the DHCP parameter will cause a loss of connection to this Web Browser. The web browser must be reconnected to the new IP address.
Once you have saved your parameters, you are done with this section. Return to the Com Wizard Page
Previous Page

Home - Configuration - Monitor - Wizard - HI 6500 Series Online Support Site

Hardy Process Solutions
San Diego, California, USA
Tel. +1 (858) 278-2900 ▪ (800) 821-5831
Fax +1 (858) 278-6700
www.hardysolutions.com ▪ hardyinfo@hardysolutions.com
hardysupport@hardysolutions.com

homeconfigurationMonitorWizardhardy